4. Check that the message "Bluetooth Serial Client (COMx) " appears under Client Ports. (X
indicates the COM port number used by Bluetooth.)
5. Click [Close].
6. On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
7. Click the icon of the printer you want to use.
8. On the [File] menu, click [Properties].
9. Click the [Ports] tab.
10. Under [Port], select the [COMx:] check box. X indicates the COM port number used by
Bluetooth.
11. Click [OK].
Close the [Printers] window.
• System requirements vary depending on the Bluetooth standard and specifications. For details, see
the manuals provided with each product.
• For information about setting up Bluetooth under other operating systems or using it with different
utilities, see the manuals provided with those operating systems or utilities.
• To always use the same printer, select the [Always use for this connection] check box.
• If a dialog box appears while transmitting a print job, reestablish network connection as follows:
1. Select the printer you want to use in the [Printers and Faxes] box.
2. Click [Connect].
• For details, see the manuals provided with the Bluetooth adaptor or computer equipped with Bluetooth.
Configuring Security Mode Settings
This describes how to configure the security mode settings.
1. Start 3Com Bluetooth Connection Manager.
2. On the [Tools] menu, click [Security Mode].
The [Security Mode] dialog box appears.
3. Select the security mode in the [Security Mode:] list.
If you click [High], or [Custom], and specify [Link] in the [Custom Settings] dialog box, enter the
Bluetooth password. For information about entering the password, see p.50 "Send the print job to the
printer in use.".
Printing with Bluetooth Connection
63
To Next Page
Loading...
Need help?
General