Printer configuration
You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer language.
• UNIX: Use the "info" command and "rsh", "rcp", "ftp" and "sftp" parameters.
• mshell: Use the "info" command.
Input Tray
Item Description
No. ID number of the paper tray
Name Name of the paper tray
PaperSize Size of paper loaded in the paper tray
status Current status of the paper tray
• Normal: Normal
• NoInputTray: No tray
• PaperEnd: No paper
Output Tray
Item Description
No. ID number of the output tray
Name Name of the output tray
status Current status of the output tray
• Normal: Normal
• PaperExist: Paper exist
• OverFlow: Paper is full
• Error: Other errors
Emulation
Item Description
No. ID number of the printer language used by the
printer
6. Monitoring and Configuring the Printer
268
To Next Page
Loading...
Need help?
General