Available operations
The following functions are available:
• Printer Information function
• Display the network settings and detailed information of the printer.
• Display the number of pages printed under each user code.
• Display the status of print jobs sent from computers.
• Change the printer network settings.
• Device Settings function
• Lock some of the setting items on the control panel so that they cannot be changed using
the control panel.
• Select type of paper loaded in the paper trays.
• Energy Saver function
• Enable or disable the Energy Saver mode.
• System Status function
• Display the information such as when paper is depleted during printing on a computer.
• Groups function
• Monitor multiple printers at the same time. When there are multiple printers to manage, you
can create groups and classify the printers to facilitate management.
• You can customize printer status according to groups, and send status notification e-mail
to a computer.
Installing SmartDeviceMonitor for Admin
Follow the procedure below to install SmartDeviceMonitor for Admin.
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click “SmartDeviceMonitor for Admin” installation, and then click [Next>].
5. The software license agreement appears in the [License Agreement] dialog box.
After reading through its contents, click [Yes] if you agree, and then click [Next >].
6. Follow the instructions on the screen.
A message appears when the installation is complete.
Using SmartDeviceMonitor for Admin
207
To Next Page
Loading...
Need help?
General