10. Select the [Specify a location:] check box, and then click [Browse...].
The [Browse for Folder] dialog box appears.
11. Insert the CD-ROM into the CD-ROM drive.
When Auto Run starts, click [Exit].
12. Specify the location where USB Printing Support is located, and then click [Next >].
If the CD-ROM drive is D, the source files of USB Printing Support are stored in the following location:
• RPCS
D:\DRIVERS\RPCS\WIN9X_ME\(Language)\DISK1
• PCL 5c
D:\DRIVERS\PCL5C\WIN9X_ME\(Language)\DISK1
• PCL 6
D:\DRIVERS\PCL6\WIN9X_ME\(Language)\DISK1
• PostScript 3
D:\DRIVERS\PS\WIN9X_ME\(Language)\DISK1
13. Check the location, and then click [Next >].
Add Printer Wizard starts.
14. Click [Finish].
Installation is complete. If installation is successful, the icon of the printer connected to the "USB001"
port is added to the [Printers] window.
• The number after "USB" varies depending on the number of printers connected.
• It is not necessary to reinstall USB Printing Support when connecting a different printer via USB interface
when USB Printing Support is installed.
• After installing USB Printing Support, if the printer driver is not installed, follow the plug-and-play
instructions of the printer.
• Install the printer driver from the CD-ROM provided with the printer.
Windows 2000 - USB
• Installing a printer driver requires Administrators permission. Log on using an account that has Ad-
ministrators permission.
If the printer driver has already been installed, plug and play is enabled, and the icon of the printer
connected to the "USB" port is added to the [Printers] window.
1. Preparing for Printing
54
To Next Page
Loading...
