status
Use the "status" command to display the printer status.
Messages
msh> status
• For details, see p.260 "Getting Printer Information over the Network".
syslog
Use the "syslog" command to display the information stored in the printer's system log.
View message
msh> syslog
• For details about the information displayed, see p.281 "Message List".
upnp
Use the "upnp" command to display and configure the universal plug and play.
Public URL display
msh> upnp url
Public URL configuration
Msh< upnp url "string"
• Enter the URL string in the character string.
web
Use the "web" command to display and configure parameters on Web Image Monitor.
View Settings
msh> web
URL Configuration
You can set URLs linked by clicking URL on Web Image Monitor.
Specify "1" or "2" for x as the number corresponding to the URL. Up to two URLs can be registered
and specified.
6. Monitoring and Configuring the Printer
252
To Next Page
Loading...
Need help?
General