Maintenance Menu
You can set printing conditions such as density and calibration, and printer management such as deleting
temporary print jobs from the hard disk.
Changing the maintenance menu
This section explains changing the maintenance menu using examples.
Automatic deletion of temporary jobs in the hard disk
Follow the procedure below to set automatic deletion of temporary jobs stored in the hard disk.
1. Press the [Menu] key.
The menu screen appears.
2. Press the [ ] or [ ] key to display [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to display [HD Management], and then press the [OK] key.
4. Press the [ ] or [ ] key to display [Auto Delete Temporary Jobs], and then press the [OK]
key.
5. Press the [ ] or [ ] key to select [On], and then press the [OK] key.
6. Press the [ ] or [ ] key to set automatic deletion timer in hours between 1 through 200.
7. Press the [OK] key.
Wait for one second. The hard disk management screen appears.
8. Press the [Menu] key.
The initial screen appears.
Maintenance Menu
161
To Next Page
Loading...
Need help?
General