Print Settings Menu
The System Menu allows you to set conditions for printing.
Changing the Print Settings menu
Follow the procedure below to change the Bypass Tray Priority.
1. Press the [Menu] key.
The menu screen appears.
2. Press [ ] or [ ] key to display [Print Settings], and then press the [OK] key.
3. Press [ ] or [ ] key to display [Machine Modes], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Bypass Tray Priority], and then enter the [OK] key.
5. Press the [ ] or [ ] key to select the desired setting item, and then press the [OK] key.
Wait for one second. The Machine Modes screen appears.
6. Press the [Menu] key.
The initial screen appears.
Print Settings menu parameters
This section explains about parameters that can be set on the Print Settings menu.
Machine Modes
Copies
Specify the number of copies to print.
If the number of copies to print is specified by command or the printer driver, this setting is
overridden.
• 1 to 999
Print Settings Menu
179
To Next Page
Loading...
