Setting effective time
msh> ssdp profile {1801-86400}
The default is 10800 seconds.
Advertise packet TTL settings
msh> ssdp ttl {1-255}
The default is 4.
ssh
Use the "ssh" command to view and configure SSH settings.
View settings
msh> ssh
Data compression communication settings
msh> ssh compression {on|off}
The default is "on".
SSH/SFTP communication port setting
msh> ssh port {22, 1024-65535}
The default is 22.
SSH/SFTP communication timeout setting
msh> ssh timeout {0-65535}
The default is 300.
SSH/SFTP communication login timeout setting
msh> ssh logintimeout {0-65535}
The default is 300.
Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|1024} "character string"
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The default key length is 1024, and the character string is blank.
Deleting open key for ssh/sftp communication
msh> ssh delkey
• If you do not specify a character string, current setting is displayed.
Remote Maintenance by telnet
251
To Next Page
Loading...
Need help?
General