Checking the Error Log
If files could not be stored due to printing errors, identify the cause of the errors by checking the error log
on the control panel.
• The most recent 30 errors are stored in the error log. If a new error is added when there are 30 errors
already stored, the oldest error is deleted. However, if the oldest error belongs to one of the following
print jobs, it is not deleted. The error is stored separately until the number of those errors reaches 30.
You can check any of these print jobs for error log information.
• Sample Print
• Locked Print
• Hold Print
• Stored Print
• If the main power switch is turned off, the log is deleted.
1. Press [Option].
2. Select [Show Error Log] using the [ ] or [ ] key, and then press the [OK] key.
3. Select a type of print jobs using the [ ] or [ ] key, and then press the [OK] key.
If you select [All], all error logs appears.
Checking the Error Log
125
To Next Page
Loading...
Need help?
General