Staple Capacity (Finisher SR3030)
Paper Size Staple Capacity
A3 , B4 JIS , 11×17 , 8
1
/
2
×14 , 8×13
, 8
1
/
2
×13 , 8
1
/
4
×13 , 8K
30
A4 , B5 JIS , Letter , 7
1
/
4
×10
1
/
2
, 16K
50
Mixed Size (Finisher SR3030)
Mixed Paper Size Staple Capacity
A3 and A4 30
B4 JIS and B5 JIS 30
11×17 and 8
1
/
2
×11 30
• For printing methods, see the printer driver Help.
Stapling Precautions
• Stapling can be done only with the optional finisher installed.
• Staple printing will be canceled under the following conditions:
• If the number of pages to staple exceeds maximum.
• If a paper size that cannot be stapled is selected.
• If a paper type that cannot be stapled is selected.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in the duplex mode and the staple position.
• If there are inconsistencies between the orientation in letterhead mode and the staple position.
• When staples have run out and Auto Continue is set (Printing will continue without stapling after
the message has been displayed).
• When only 1 page is printed when staples have run out.
• If paper sizes are mixed when a different paper size is specified during a print job.
Printing with the Finisher
133
To Next Page
Loading...
Need help?
General