Starting Printer Utility for Mac
Mac OS
• Before starting Printer Utility for Mac, make sure the printer is selected in [Chooser] on the Apple
menu.
1. Double-click the Printer Utility for Mac icon.
The [Printer Utility for Mac] dialog box appears.
2. Click [OK].
Printer Utility for Mac will take a few seconds to start.
Mac OS X
1. Double-click the Printer Utility for Mac icon.
The [Printer Utility for Mac] dialog box appears.
2. Click [OK].
3. In the [Available Printers:] box, select the printer you want to use.
If you change zones, select a name from [Available Network Zones:].
Click [Choose Printer...] on the Printer Utility for Mac menu if you want to change the printer.
4. Select the printer you want to use.
Printer Utility for Mac will take a few seconds to start.
5. Click [Choose].
Printer Utility for Mac Functions
Downloading PS Fonts
You can download the PS fonts to the printer memory or hard disk drive.
• The following procedure to download the fonts assume that you are a system administrator. If you
are not, be sure to consult your system administrator.
• During the download, do not turn off the power switch, operate the panel or open or close the cover.
• If the printer restarts, all the printer settings return to the defaults.
9. Mac OS Configuration
340
To Next Page
Loading...
