Maintenance menu parameters
This section explains about parameters that can be set on the Maintenance menu.
Quality Maintenance
Color Registration
You can perform automatic adjustment of color registration.
Color Calibration
You can adjust the gradation of bright (highlighted parts) and medium areas (middle parts) for printing.
• Adjust Auto Density
You can print the gradation of auto density.
• Print Sheet 1
You can print gradation correction sheet 1.
• Print Sheet 2
You can print gradation correction sheet 2.
• Reset Setting
You can reset the gradation correction value to default.
• For details, see Hardware Guide.
Registration
You can adjust the starting position of the printing page.
• Print Test Sheet
You can print the registration test sheet.
Tray 3, Tray 4, Tray 5
• Only the installed trays appear on the display panel.
• Adjustment
You can select the start position for printing on a page.
Horizontal:Tray3, Horizontal:Tray4, Horizontal:Tray5
• Only the installed trays appear on the display panel.
5. Making Printer Settings Using the Control Panel
162
To Next Page
Loading...
Need help?
General