4. On the printer's control panel, press [Prt.Jobs].
5. Select [Stored Print Jobs] using the [ ] or [ ] key, and then press [Job List].
A list of Stored Print files stored in the printer appears.
You can print files also by pressing [User ID].
6. Select the file you want to print using the [ ] or [ ] key, and then press [Print].
The confirmation screen appears.
If you set a password in the printer driver, a password confirmation screen appears. Enter the pass-
word.
7. Press [Print].
The Stored Print file is printed.
Press [Cancel] to cancel printing.
• When multiple files are selected without setting a quantity, one set less than the minimum number of
all settings is applied. If the least number of settings is one set, all selected files will be printed at one
set.
• When the number of set quantity is changed, the changed quantity is applied to all selected files.
• To stop printing after printing has started, press the [Job Reset] key. A Stored Print file is not deleted
even if [Job Reset] is pressed.
• The Stored Print file that sent to the printer is not deleted unless you delete a file or select [Auto Delete
Stored Jobs].
3. Other Print Operations
114
To Next Page
Loading...
Need help?
General