4. Press [Print].
The selected files are printed.
To cancel printing, press [Cancel].
• After printing is completed, Sample Print, Locked Print, and Hold Print files are deleted.
• You cannot select a print job that is not stored under the selected user ID.
• When printing multiple Sample Print files without specifying the number of sets on the confirmation
screen, one set less than the least number of set specified on the computer is applied for every selected
document. If the number of sets specified on the computer is "1", one set each is printed for every
document.
• When printing multiple Stored Print files without specifying the number of sets on the confirmation
screen, the least number of set specified on the computer is applied for every selected document.
• If you select [Locked Print], enter the correct password. If there are multiple passwords, the printer
prints only files that correspond to the entered password.
• If you select Stored Print files, and some of these require a password, the printer prints files that
correspond to the entered password and files that do not require a password.
• For details about printing each type of print job, see the followings:
• p.103 "Sample Print"
• p.106 "Locked Print"
• p.109 "Hold Print"
• p.112 "Stored Print"
Printing from the User ID Screen
119
To Next Page
Loading...
Need help?
General