5. Enter the user name and password, and then click [Login].
Top Page of Web Image Monitor appears.
For details about the login user name and password, consult your administrator.
6. Click [Configuration].
7. Click [System] on the [Device Settings] area, and then change the settings.
8. Click [OK].
• In the [Device Name] box, enter a device name on the printer using up to 31 characters.
• In the [Comment] box, enter a comment on the printer using up to 31 characters.
9. Quit Web Image Monitor.
10. Quit SmartDeviceMonitor for Admin.
Using SmartDeviceMonitor for Admin
215
To Next Page
Loading...
