Ricoh Aficio SP C811DN User Manual

When using DNS
Use the host name set to the data file on the DNS server.
When setting the "IPv4 address" of a printer using DHCP
Use the printer name on the configuration page as the host name.
• For details about printing a configuration page, see p.170 "List/Test Print Menu".
In other cases
Add the IPv4 address and host name of the network printer to the hosts file on the computer used for printing.
Methods of addition vary depending on operating systems.
Windows 95/98/Me
1. Copy \WINDOWS\HOSTS.SAM to the same directory and name it "HOSTS" with no ex-
tension.
2. Open the "\WINDOWS\HOSTS" file created using memo pad files, for instance.
3. Add an IP address and host name to the hosts file using the following format:
192.168.15.16 host # NP
"192.168.15.16" is the "IPv4 address", "host" is the printer's host name, and "#NP" is replaced by
comments. Insert a space or tab between "192.168.15.16" and "host", between "host" and "#NP"
respectively, using one line for this format.
4. Save the file.
Windows 2000/XP, Windows Server 2003, Windows NT 4.0
1. Open the hosts file using memo pad files, for instance.
The hosts file is in the following folder:
\WINNT\SYSTEM32\DRIVERS\ETC\HOSTS
"\WINNT" is the directory of the installation destination for Windows 2000/XP, Windows Server
2003, and Windows NT 4.0.
2. Add an IPv4 address and host name to the hosts file using the following format:
192.168.15.16 host # NP
"192.168.15.16" is the "IPv4 address", "host" is the printer's host name, and "#NP" is replaced by
comments. Insert a space or tab between "192.168.15.16" and "host", between "host" and "#NP"
respectively, using one line for this format.
8. Special Operations under Windows
304
8

Ricoh Aficio SP C811DN Specifications

General

Brand	Ricoh
Model	Aficio SP C811DN
Category	Printer
Language	English