1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
5. Click [Next >].
6. Click [Local printer attached to this computer], and then click [Next >].
7. Select the port you want to use, and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
8. Select the name of the printer whose driver you want to install, and then click [Next >].
9. Click [Close] to close the [Printer Port] dialog box.
10. Click [Next >].
11. Change the printer name if you want, and then click [Next >].
12. Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
13. Restart the computer to complete installation.
• Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on
the CD-ROM root directory.
• The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
Printing with Parallel Connection
61
To Next Page
Loading...
Need help?
General