0
V.8 protocol on/off - G3 switch 03, bit2
1 0 0 9.6k
0 1 0 1 12.0k
0 1 1 0 14.4k
0 1 1 1 16.8k
1 0 0 0 19.2k
1 0 0 1 21.6k
1 0 1 0 24.0k
1 0 1 1 26.4k
1 1 0 0 28.8k
1 1 0 1 31.2k
1 1 1 0 33.6k
Other settings - Not used
4-7
Modem types available for reception
• The setting of these bits is used to inform the
transmitting terminal of the available modem
type for the machine in receive mode.
• If V.34 is not selected, V.8 protocol must be
disabled manually.
Cross reference:
V.8 protocol on/off - G3 switch 03, bit2
Bit 7 Bit 6 Bit 5 Bit 4 Setting
0 0 0 1 V.27ter
0 0 1 0
V.27ter,
V.29
0 0 1 1
V.27ter, V.
29, V.33
0 1 0 0
V.27ter, V.
29, V.17/
V.33
0 1 0 1
V.27ter, V.
29, V.17/
V33, V.34
Other settings - Not used
G3 Switch 07 [SP No. 1-105-008]
4. Service Tables
82