Ricoh D148 - Page 1031

Main SP Tables-2-2
D146/D147/D148/D149/D150 2-312 System Maintenance Section
2617
[Special3:TrailEdgeCorrection]
Sets output value [%] for paper transfer ampere trailing edge correction per line
speed / printing sides of special paper 3.
001
Paper
Transfer:standard:1side
*ENG [0 to 995 / 100 / 5%/step]
002
Paper
Transfer:standard:2side
*ENG [0 to 995 / 100 / 5%/step]
003 Paper Transfer:Low:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:Low:2side *ENG [0 to 995 / 100 / 5%/step]
2618
[Special3:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per line
speed / printing sides of special paper 3.
001
Paper
Transfer:standard:1side
*ENG [0 to 50 / 0 / 2mm/step]
002
Paper
Transfer:standard:2side
*ENG [0 to 50 / 0 / 2mm/step]
003 Paper Transfer:Low:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:Low:2side *ENG [0 to 50 / 0 / 2mm/step]
2623
[Special1 Thick:Bias:BW]
Sets paper transfer ampere per mode (BW/FC) / printing sides of special paper
1 using thick paper setting. “Thick paper” means thick paper 2 or upper with
model D148/D149/D150, thick paper 1 or upper with model D146/D147.
003 PaperTransfer:1side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 11 /
1-uA/step]
004 PaperTransfer:2side *ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 15 /
1-uA/step]