Ricoh D148 - Page 1090

Main SP Tables-3
System Maintenance Section 2-371 D146/D147/D148/D149/D150
SP Mode Tables
002
Current: C *ENG [2.00 to 5.00 / 3.75 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (C).
003
Current: M *ENG [2.00 to 5.00 / 3.75 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (M).
004
Current: Y *ENG [2.00 to 5.00 / 3.75 / 0.01V/step]
Displays/Sets Current TD Sensor Control Voltage (Y).
011
Initial: K *ENG [2.00 to 5.00 / 3.60 / 0.01V/step]
Displays control voltage of TD sensor when default setting TD sensor.
012
Initial: C *ENG [2.00 to 5.00 / 3.75 / 0.01V/step]
Displays control voltage of TD sensor when default setting TD sensor.
013
Initial: M *ENG [2.00 to 5.00 / 3.75 / 0.01V/step]
Displays control voltage of TD sensor when default setting TD sensor.
014
Initial: Y *ENG [2.00 to 5.00 / 3.75 / 0.01V/step]
Displays control voltage of TD sensor when default setting TD sensor.
3230 [Vtref :Disp/Set]
001
Current: K *ENG [0.00 to 5.00 / 2.50 / 0.01V/step]
Displays / Sets current target value of TD sensor's output voltage: Vtref (K).
002
Current: C *ENG [0.00 to 5.00 / 2.50 / 0.01V/step]
Displays / Sets current target value of TD sensor's output voltage: Vtref (C).
003
Current: M *ENG [0.00 to 5.00 / 2.50 / 0.01V/step]
Displays / Sets current target value of TD sensor's output voltage: Vtref (M).
004
Current: Y *ENG [0.00 to 5.00 / 2.50 / 0.01V/step]
Displays / Sets current target value of TD sensor's output voltage: Vtref (Y).
011 Initial: K *ENG [0.00 to 5.00 / 2.50 / 0.01V/step]