Ricoh D148 - Page 1556

Input Check Table
System Maintenance Section 3-17 D146/D147/D148/D149/D150
Input and Output
Check
6007
[ADF INPUT Check]
Gets sensor information from ADF. Displays signal level of sensor as it is.
001
Original Length 1 (B5
Detection Sensor)
ENG [0 or 1 / 0 / 1/step]
002
Original Length 2 (A4
Detection Sensor)
ENG [0 or 1 / 0 / 1/step]
003
Original Length 3 (LG
Detection Sensor)
ENG [0 or 1 / 0 / 1/step]
004 Original Width 1 ENG [0 or 1 / 0 / 1/step]
005 Original Width 2 ENG [0 or 1 / 0 / 1/step]
006 Original Width 3 ENG [0 or 1 / 0 / 1/step]
007 Original Width 4 ENG [0 or 1 / 0 / 1/step]
008 Original Width 5 ENG [0 or 1 / 0 / 1/step]
009 Original Detection ENG [0 or 1 / 0 / 1/step]
011 Skew Correction ENG [0 or 1 / 0 / 1/step]
013 Registration Sensor ENG [0 or 1 / 0 / 1/step]
014 Exit Sensor ENG [0 or 1 / 0 / 1/step]
015 Feed Cover Sensor ENG [0 or 1 / 0 / 1/step]
016 Lift Up Sensor ENG [0 or 1 / 0 / 1/step]
023 Rear Edge Detection ENG [0 or 1 / 0 / 1/step]