D163 216 SM
Mail Type Item 1 Item 2 Item 3
Mail address
of sender
Memory sending
Mail address
of sender
SMTP receiving and
delivery (Off Ramp
Gateway)
Mail error
notification
--- Error Message No. xxxx From CSI (RTI)
Items 1, 2, and 3 in the table above are in the Subject.
- Subjects Displayed on the PC -
E-mail Messages
After entering the subject, you can enter a message with: TX Mode> Text
An e-mail message (up to 5 lines) can be pre-registered with: User Tools> System Settings> File
Transfer> Program/Change/Delete E-mail Message
- Limitations on Entries -
Item Maximum
Number of Lines 5 lines
Line Length 80 characters
Name Length 20 characters
Message Disposition Notification (MDN)
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC – Internet/LAN
Fax Boards – E-mail Options
The network system administrator can confirm whether a sent mail has been received correctly or
not. This confirmation is done in four steps.
1. Send request for confirmation of mail reception. To enable or disable this request (known as
MDN): TX Mode> Reception Notice
2. Mail reception (receive confirmation request)
To Next Page
Loading...
