Service Call 816-899
D146/D147/D148/D149/D150 5-136 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC860-00 B
HDD startup error at main power on (HDD error)
§ The HDD is connected but the driver detected the following
errors.
§ SS_NOT_READY:/* (-2)HDD does not become
READY*/
§ SS_BAD_LABEL:/* (-4)Wrong partition type*/
§ SS_READ_ERROR:/* (-5)Error occurred while reading
or checking the label*/
§ SS_WRITE_ERROR:/* (-6)Error occurred while writing
or checking the label*/
§ SS_FS_ERROR:/* (-7)Failed to repair the filesystem*/
§ SS_MOUNT_ERROR:/* (-8)Failed to mount the
filesystem*/
§ SS_COMMAND_ERROR:/* (-9)Drive not responding to
command*/
§ SS_KERNEL_ERROR:/* (-10)Internal kernel error*/
§ SS_SIZE_ERROR:/* (-11)Drive size too small*/
§ SS_NO_PARTITION:/* (-12)The specified partition
does not exist*/
§ SS_NO_FILE:/* (-13)Device file does not exist*/
§ Attempted to acquire HDD status through the driver but
there has been no response for 30 seconds or more.
§ Unformatted HDD
§ Label data corrupted
§ HDD defective
Format the HDD through SP mode.
To Next Page
Loading...
