EasyManua.ls Logo

Ricoh D148 - Page 657

Ricoh D148
2375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Call 816-899
SM 5-183 D146/D147/D148/D149/D150
Troubleshooting
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-02 D
Log Data Error 2
An error was detected in the handling of the log data at power
on or during machine operation.
Log encryption is enabled but encryption module is not installed.
§ Replace or set again the encryption module.
§ Disable the log encryption setting.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-03 D
Log Data Error 3
An error was detected in the handling of the log data at power
on or during machine operation.
Inconsistency of encryption key between NV-RAM and HDD.
§ Disable the log encryption setting.
§ Initialize LCS memory (SP5801-019).
§ Initialize the HDD (SP5-832-004).
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC876-04 D
Log Data Error 4
An error was detected in the handling of the log data at power
on or during machine operation.
§ Log encryption key is disabled but the log data file is
encrypted. (NVRAM data corruption)
§ Log encryption key is enabled but the log data file is not
encrypted. (NVRAM data corruption)
Initialize the HDD (SP5-832-004).

Table of Contents

Related product manuals