Ricoh D148 - Page 996

Main SP Tables-2-2
System Maintenance Section 2-277 D146/D147/D148/D149/D150
SP Mode Tables
2537
[Thick3:TrailEdgeCorrection]
Sets output value [%] for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2538
[Thick3:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]
2543
[OHP:Bias:BW]
Sets paper transfer ampere per mode (FC/BW) of OHP.
003
PaperTransfer
*ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 11 /
1-uA/step]
2547
[OHP:Bias:FC]
Sets paper transfer ampere per mode (FC/BW) of OHP.
003
PaperTransfer
*ENG
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) / 19 /
1-uA/step]
2551
[OHP:SizeCorrection:BW]
Sets paper transfer ampere paper size environment correction per mode
(FC/BW) of OHP.
003 PaperTransfer:S1 *ENG [100 to 995 / 100 / 1%/step]
007 PaperTransfer:S2 *ENG [100 to 995 / 100 / 1%/step]