Ricoh FT 4015 - Page 110

Mode No. Function Settings
68
V
L2
Correction
Selection
Selects or deselects V
L2
correction.
0: V
L2
Correction
1: No V
L2
Correction
Keep this setting at 0.
69
Imaging Unit
Counter
Display
Shows the total number of copies made so far by
the imaging unit installed in the machine. This
counter is reset by SP93.
The first three digits are displayed in the
magnification indicator.
Press the
*
key to view the last three digits.
71
Sorter
Operation
Enables sorter operation.
0: No Sorter
1: Sorter Installed
74
Special Paper
Size Setting
Sets the appropriate paper size for special paper
loaded in the paper feed tray.
0:

(Universal)
1: A3
2:

(Universal)
3: B4
4: A4
5: A4R
6: B5
7: B5R
8: A5
9: B6
13: DLT
14: LG
15: LT
16: LTR
17: HLT
19: F
27: 8 k
28: 16 k
(Sideways)
29: 16 k
(Lengthwise)
The "

" mark on the paper size dial must be
selected to use this special feature.
When the paper feed tray is selected, the
appropriate paper size or the "

" mark will be
displayed and the copier will operate in accordance
with the set paper size.
76
Sorter Bin
Capacity
Sets the stock quantity limits. If set to 1, the
maximum amount of copies depends on the paper
size (see the specifications for the sorter).
0: No limit
1: Limit
77
Auto Shut Off
(Energy Star)
On/Off
Selects the "Automatic Shut off" mode.
0: Yes
1: No
The copier automatically shuts itself off at the auto
shut off time selected (SP14).
78
Auto Energy
Saver Mode
On/Off
Selects the "Automatic Energy Saver" mode. 0: No
1: Yes
The copier automatically goes to Energy Saver
mode at the auto reset time selected (SP15).
81
Factory
Initialization
Factory use only.
82
Data
Communication
Factory use only.
PROGRAM MODES 20 December 1996
4-20