Ricoh G133 - Page 308

Jam Detection
G133 4-92 SM
Jam Code
SP
Display Description
LCD
Display
7504 147
Finisher Stack 2
Release Motor (B793)
 Lower clamp roller HP sensor does
not turn off after the lower clamp
roller has moved from its home
position.
 Lower clamp roller HP sensor does
not turn on after the lower clamp
roller has returned to its home
position.
R7-R11
7504 148
Finisher Stopper
Motor (B793)
 Stopper S HP sensor does not turn
off after the stopper S has moved
from its home position.
 Stopper S HP sensor does not turn
on after the stopper S has returned
to its home position.
R7-R11
7504 191
Finisher Entrance:
EUP (B805)
Paper does not reach the finisher
entrance sensor or stays at the finisher
entrance sensor.
R1-R4
7504 192
Finisher Proof Exit:
EUP (B805)
Paper does not reach the proof tray exit
sensor or stays at the proof tray exit
sensor.
R1-R4
7504 193
Finisher Shift Tray
Exit: EUP (B805)
Paper does not reach the upper tray exit
sensor or stays at the upper tray exit
sensor.
R1-R4
7504 194
Finisher Stapler Exit:
EUP (B805)
 Stapling tray paper sensor does not
turn on after the finisher entrance
sensor has turned on.
 Stapling tray paper sensor does not
turn off after it has turned on.
R5-R8
7504 195
Finisher Exit: EUP
(B805)
 Upper tray exit sensor does not turn
on while the stack feed-out belt is
R8-R12