Ricoh G133 - Page 309

Jam Detection
SM 4-93 G133
Trouble-
shooting
Jam Code
SP
Display Description
LCD
Display
turned on.
 Upper tray exit sensor does not turn
off after the stack feed-out belt has
returned to its home position.
7504 196 Finisher Staple: EUP Not used -
7504 197
Finisher Saddle Stitch
Staple: EUP
Not used -
7504 198 Finisher Folder: EUP Not used -
7504 199
Finisher Tray Motor:
EUP (B805)
 Upper tray limit sensor does not
turn on after the upper tray has
lifted up.
 Upper tray limit sensor does not
turn off after the upper tray has
moved down.
R1-R4/
R5-R8
7504 200
Finisher Jogger Motor:
EUP (B805)
 Jogger fence HP sensor does not
turn on/off after the jogger motor
has turned on.
 Stack feed out belt HP sensor does
not turn on/off after the feed out belt
motor has turned on.
R5-R8
7504 201
Finisher Shift Motor:
EUP (B805)
 Shift roller HP sensor does not turn
on/off after the shift roller motor has
turned on.
 Exit guide plate HP sensor does not
turn on/off after the exit guide plate
motor has turned on.
 Stacking roller HP sensor does not
turn on/off after the stacking sponge
roller motor has turned on.
R1-R4/
R5-R8