Ricoh G133 - Page 310

Jam Detection
G133 4-94 SM
Jam Code
SP
Display Description
LCD
Display
7504 202
Finisher Staple
Moving Motor: EUP
(B805)
 Corner stapler HP sensor does not
turn on/off after the corner stapler
movement motor has turned on.
 Stapler rotation HP sensor does not
turn on/off after the corner stapler
rotation motor has turned on.
R5-R8
7504 203
Finisher Staple Motor:
EUP (B805)
 Corner stapler does not finish
stapling after a specified time.
 Booklet stapler does not finish
stapling after a specified time.
R5-R8
7504 204
Finisher Folder Motor:
EUP
Not used -
7504 205
Finisher Exit Motor:
EUP
Not used -
7504 206
Finisher Punch Motor:
EUP (B805)
 Punch encoder sensor does not
turn on/off after the punch drive
motor has turned on.
 Punch movement HP sensor does
not turn on/off after the punch
movement motor has turned on.
 Paper position slide HP sensor
does not turn on/off after the paper
position sensor slide motor has
turned on.
R1-R4
7504 220 MBX P. Feed 1: OFF Japanese models only -
7504 221 MBX P. Feed 1: ON Japanese models only -
7504 222 MBX P. Feed 2: OFF Japanese models only -
7504 223 MBX P. Feed 2: ON Japanese models only -