Service Mode Table
G133 5-14 SM
014 Tray 2/3/4/5: Thin *ENG
015 Tray 2/3/4/5: Middle Thick *ENG
016 By-pass: Thin *ENG
017 By-pass: Middle Thick *ENG
018 By-pass: Thick 3 *ENG
019 Duplex: Thin *ENG
020 Duplex: Middle Thick *ENG
1007 [By-Pass Size Detection] By-Pass Size Detection Display
LG *ENG
[0 or 1 / 0 / – ] 0: Disable, 1: Enable
001
Enables or disables the automatic paper size detection function of the by-pass
tray.
This SP determines what paper size the machine detects if the detected size is
less than 8.5”.
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1103 [Fusing Idling] Fusing Idling Adjustment
Extra Idling Time *ENG
[0 to 60 / 0 / 1 sec/step] Not used
001
Specifies how long the extra idling operation is executed.
016 Extra Idling Time (L) *ENG
Specifies how long the extra idling
operation is executed for each
environment.
[0 to 250 / 60 / 1 sec/step]
Each environment is determined with
SP1112-001 and 002.
017 Extra Idling Time (H) *ENG
018 Extra Idling Time (M) *ENG
[0 to 250 / 25 / 1 sec/step]
To Next Page
Loading...
