Service Mode Table
SM 5-65 G133
Service
Tables
Enables/disables the automatic line position adjustment
Page: Job End: BW+FC *ENG
[0 to 999 / 500 / 1 page/step]
002
Adjusts the threshold of the line position adjustment for BW and color printing
mode after job end.
Page: Job End: FC *ENG
[0 to 999 / 200 / 1 page/step]
003
Adjusts the threshold of the line position adjustment for color printing mode
after job end.
Page: Interrupt: BW+FC *ENG
[0 to 999 / 200 / 1 page/step]
004
Adjusts the threshold of the line position adjustment for BW and color printing
mode during job.
Page: Interrupt: FC *ENG
[0 to 999 / 200 / 1 page/step]
005
Adjusts the threshold of the line position adjustment for color printing mode
during jobs.
Page: Stand-By: BW *ENG
[0 to 999 / 100 / 1 page/step]
006
Adjusts the threshold of the line position adjustment for BW printing mode in
stand-by mode. The line position adjustment is done when the number of
outputs in BW printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Page: Stand-By: FC *ENG
[0 to 999 / 100 / 1 page/step]
007
Adjusts the threshold of the line position adjustment for BW printing mode in
stand-by mode. The line position adjustment is done when the number of
outputs in color printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Temp . * E NG
[0 to 100 / 5 / 1°C/step]
008
Adjust the temperature change threshold for the line position adjustment
(Mode b: adjustment once). The timing for line position adjustment depends on
the combinations of several conditions. For details, see ‘p.6-3 "Automatic Line
Position Adjustment"’ in the "Detailed Section Descriptions" section.
To Next Page
Loading...
