Service Mode Table
SM 5-71 G133
Service
Tables
004 Threshold 4 *ENG
[0 to 350 / 148 / 1 mm/step]
Threshold 4 ≤ paper ≤ Threshold 3:
Paper is detected as "S4" size.
Paper ≤ Threshold 4:
Paper is detected as "S5" size.
2311 [Non Image Area: Bias]
001 Image Transfer *ENG
Adjusts the bias of the image transfer belt
between images. This value is added to the
value of the image transfer belt bias.
[10 to 250 / 100 / 5 %/step]
002 Paper Transfer *ENG
Adjusts the bias of the paper transfer roller
between images.
[0 to 200 / 5 / 1 –μA/step]
003
Paper Transfer:
Resistance FB
*ENG
Adjusts the bias of the paper transfer roller
for measuring the resistance of the paper
transfer roller when the image processing
starts.
[0 to 200 / 30 / 1 –μA/step]
2314
[P/M Pattern: Bias]
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Image Transfer: Plain *ENG
Adjusts the bias of the image transfer
belt during the process control and
automatic line position control.
[0 to 80 / 32 / 1 μA /step]
002 Image Transfer: Thick 1 *ENG
[0 to 80 / 18 / 1 μA /step]
003
Image Transfer: Thick 2 &
FINE
*ENG
[0 to 80 / 12 / 1 μA /step]
2316 [Power ON: Bias]
To Next Page
Loading...
