Service Mode Table
G133 5-72 SM
001 Image Transfer *ENG
Adjusts the bias of the image transfer belt
at warming up mode after a machine has
been turned on or any door has been
closed.
[0 to 80 / 5 / 1 μA /step]
2326 [Transfer Roller CL: Bias] Transfer Roller Cleaning: Bias Adjustment
Positive *ENG
[0 to 5000 / 2000 / 1 V /step]
001
Adjusts the positive voltage of the paper transfer roller for cleaning the paper
transfer roller.
Negative *ENG
[0 to 200 / 50 / 1 –μA /step]
002
Adjusts the negative current of the paper transfer roller for cleaning the paper
transfer roller.
Negative: Limit Voltage *ENG
[0 to 5000 / 2000 / 1 –V /step]
003
Adjusts the negative current limit of the paper transfer roller for cleaning the
paper transfer roller.
2351
[Common: BW: Bias] Image Transfer Belt: B/W: Bias Adjustment
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
Image Transfer: Plain *ENG
[0 to 80 / 38 / 1 μA]
001
Adjusts the current for the image transfer belt in B/W mode for plain paper.
Image Transfer: Thick 1 *ENG
[0 to 80 / 21 / 1 μA]
002
Adjusts the current for the image transfer belt in B/W mode for thick 1 paper.
Image Transfer: Thick 2
& FINE
*ENG
[0 to 80 / 14 / 1 μA]
003
Adjusts the current for the image transfer belt in B/W mode for thick 2 paper or
FINE mode.
To Next Page
Loading...
