Service Mode Table
G133 5-74 SM
Adjusts the current for the image transfer belt for Yellow in full color mode for
thick 1 paper.
Image Transfer: Thick 2 &
FINE: Bk
*ENG
[0 to 80 / 11 / 1 μA]
009
Adjusts the current for the image transfer belt for Black in full color mode for
Thick 2 and fine.
Image Transfer: Thick 2 & FINE: M *ENG
[0 to 80 / 11 / 1 μA]
010
Adjusts the current for the image transfer belt for Magenta in full color mode for
Thick 2 and fine.
Image Transfer: Thick 2 & FINE: C *ENG
[0 to 80 / 12 / 1 μA]
011
Adjusts the current for the image transfer belt for Cyan in full color mode for
Thick 2 and fine.
Image Transfer: Thick 2 & FINE: Y *ENG
[0 to 80 / 15 / 1 μA]
012
Adjusts the current for the image transfer belt for Yellow in full color mode for
Thick 2 and fine.
[Common: LL]
2381
Adjusts the environment coefficient for each mode. When the environment is
detected as LL, SP2351 and SP2357 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Image Transfer: Plain *ENG
[10 to 250 / 70 / 5%/step]
002 Image Transfer: Thick 1 *ENG
[10 to 250 / 80 / 5%/step]
003
Image Transfer: Thick 2 &
FINE
*ENG
[10 to 250 / 80 / 5%/step]
004
Image Transfer: P/M
Pattern
*ENG
[10 to 250 / 100 / 5%/step]
P/M Pattern: When doing process control
or automatic line position adjustment.
To Next Page
Loading...
