Ricoh G133 - Page 397

Service Mode Table
SM 5-75 G133
Service
Tables
[Common: ML]
2382
Adjusts the environment coefficient for each mode. When the environment is
detected as ML, SP2351 and SP2357 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Image Transfer: Plain *ENG
[10 to 250 / 90 / 5%/step]
002 Image Transfer: Thick 1 *ENG
[10 to 250 / 90 / 5%/step]
003
Image Transfer: Thick 2 &
FINE
*ENG
[10 to 250 / 90 / 5%/step]
004
Image Transfer: P/M
Pattern
*ENG
[10 to 250 / 100 / 5%/step]
P/M Pattern: When doing the process
control or automatic line position
adjustment.
[Common: MM]
2383
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2351 and SP2357 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Image Transfer: Plain *ENG
[10 to 250 / 100 / 5%/step]
002 Image Transfer: Thick 1 *ENG
[10 to 250 / 100 / 5%/step]
003 Image Transfer: Thick 2 & FINE *ENG
[10 to 250 / 100 / 5%/step]
004 Image Transfer: P/M Pattern *ENG
[10 to 250 / 100 / 5%/step]
P/M Pattern: When doing the
process control or automatic
line position adjustment.
[Common: MH]
2384
Adjusts the environment coefficient for each mode. When the environment is
detected as MH, SP2351 and SP2357 are multiplied by these SP values.