Service Mode Table
SM 5-119 G133
Service
Tables
detected as HH, SP2671 and SP2672 are multiplied by these SP values.
001 Paper Transfer: 1st Side *ENG
[10 to 250 / 120 / 5%/step]
002 Separation DC: 1st Side *ENG
[10 to 250 / 80 / 5%/step]
[Thick 5: Bias]
2690
Adjusts the DC voltage of the discharge plate for thick paper 5.
001 Separation DC: 1st Side *ENG
[0 to 5000 / 1000 / 10 –V/step]
[Thick 5: Bias: BW]
2691
Adjusts the current for the paper transfer roller for thick paper 5 in
black-and-white mode.
001 Paper Transfer: 1st Side *ENG
[0 to 200 / 10 / 1 –μA /step]
[Thick 5: Bias: FC]
2692
Adjusts the current for the paper transfer roller for thick paper 5 in full color
mode.
001 Paper Transfer: 1st Side *ENG
[0 to 200 / 12 / 1 –μA /step]
[Thick 5: Paper Size Correction]
2693
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2691 and SP2692 are multiplied by these SP values.
001
Paper Transfer: 1st Side:
S1
*ENG
[100 to 600 / 100 / 5%/step]
S1 size ≥ 297 mm (Paper width)
002
Paper Transfer: 1st Side:
S2
*ENG
[100 to 600 / 140 / 5%/step]
297 mm ≥ S2 size ≥ 275 mm (Paper
width)
003 Paper Transfer: 1st Side: *ENG
[100 to 600 / 200 / 5%/step]
To Next Page
Loading...
