Service Mode Table
G133 5-120 SM
S3 275 mm ≥ S3 size ≥ 210 mm (Paper
width)
004
Paper Transfer: 1st Side:
S4
*ENG
[100 to 600 / 260 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm (Paper
width)
005
Paper Transfer: 1st Side:
S5
*ENG
[100 to 600 / 330 / 5%/step]
148 mm ≥ S5 size (Paper width)
[Thick 5: Leading Edge Correction] Thick 5 Paper: Leading Edge Correction
2694
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2691 and SP2692 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2695.
001 Paper Transfer: 1st Side *ENG
002 Separation DC: 1st Page *ENG
[0 to 400 / 100 / 5%/step]
[Thick 5: L Edge: Timing]
2695
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
002 Separation DC: 1st Page *ENG
[0 to 30 / 0 / 1 mm/step]
[Thick 5: Trailing Edge Correction] Thick 5 Paper: Trailing Edge Correction
2696
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2691 and SP2692 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2697.
To Next Page
Loading...
