Ricoh G133 - Page 445

Service Mode Table
SM 5-123 G133
Service
Tables
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2711 and SP2712 are multiplied by these SP values.
001
Paper Transfer: 1st Side:
S1
*ENG
[100 to 600 / 100 / 5%/step]
S1 size ≥ 297 mm (Paper width)
002
Paper Transfer: 1st Side:
S2
*ENG
[100 to 600 / 140 / 5%/step]
297 mm ≥ S2 size ≥ 275 mm (Paper
width)
003
Paper Transfer: 1st Side:
S3
*ENG
[100 to 600 / 200 / 5%/step]
275 mm ≥ S3 size ≥ 210 mm (Paper
width)
004
Paper Transfer: 1st Side:
S4
*ENG
[100 to 600 / 260 / 5%/step]
210 mm ≥ S4 size ≥ 148 mm (Paper
width)
005
Paper Transfer: 1st Side:
S5
*ENG
[100 to 600 / 330 / 5%/step]
148 mm ≥ S5 size (Paper width)
[Thick 6: Leading Edge Correction] Thick 6 Paper: Leading Edge Correction
2714
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2711 and SP2712 are multiplied by these SP values.
 The paper leading edge area can be adjusted with SP2715.
001 Paper Transfer: 1st Side *ENG
002 Separation DC: 1st Page *ENG
[0 to 400 / 100 / 5%/step]
[Thick 6: L Edge: Timing]
2715
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
[0 to 30 / 0 / 1 mm/step]