Service Mode Table
SM 5-131 G133
Service
Tables
006 Separation DC: Plain: 2nd Side: *ENG
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 120 / 5%/step]
[Special 1: ML] Special 1 Paper: ML Environment Coefficient Adjustment
2782
Adjusts the environment coefficient for each mode When the environment is
detected as ML, SP2753 and SP2757 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 90 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[10 to 250 / 90 / 5%/step]
2782
Adjusts the environment coefficient for each mode. When the environment is
detected as ML, SP2751 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side *ENG
[10 to 250 / 200 / 5%/step]
006 Separation DC: Plain: 2nd Side: *ENG
[10 to 250 / 170 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 110 / 5%/step]
[Special 1: MM] Special 1 Paper: MM Environment Coefficient Adjustment
2783
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2753 and SP2757 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 100 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
[10 to 250 / 100 / 5%/step]
To Next Page
Loading...
