Service Mode Table
G133 5-132 SM
004 Paper Transfer: FINE: 2nd Side *ENG
2783
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2751 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side *ENG
[10 to 250 / 170 / 5%/step]
006 Separation DC: Plain : 2nd Side: *ENG
[10 to 250 / 140 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 100 / 5%/step]
[Special 1: MH] Special 1 Paper: MH Environment Coefficient Adjustment
2784
Adjusts the environment coefficient for each mode. When the environment is
detected as MH, SP2753 and SP2757 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 110 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[10 to 250 / 110 / 5%/step]
2784
Adjusts the environment coefficient for each mode. When the environment is
detected as MH, SP2751 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side *ENG
[10 to 250 / 100 / 5%/step]
006 Separation DC: Plain: 2nd Side: *ENG
[10 to 250 / 90 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 90 / 5%/step]
[Special 1: HH] Special 1 Paper: HH Environment Coefficient Adjustment
2785
Adjusts the environment coefficient for each mode. When the environment is
detected as HH, SP2753 and SP2757 are multiplied by these SP values.
To Next Page
Loading...
