Service Mode Table
G133 5-140 SM
006 Separation DC: Plain: 2nd Side: *ENG
[10 to 250 / 140 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 100 / 5%/step]
[Special 2: MH] Special 2 Paper: MH Environment Coefficient Adjustment
2834
Adjusts the environment coefficient for each mode. When the environment is
detected as MH, SP2803 and SP2807 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 110 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[10 to 250 / 110 / 5%/step]
005-008
Adjusts the environment coefficient for each mode. When the environment is
detected as MH, SP2801 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side *ENG
[10 to 250 / 100 / 5%/step]
006 Separation DC: Plain: 2nd Side: *ENG
[10 to 250 / 90 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 90 / 5%/step]
[Special 2: HH] Special 2 Paper: HH Environment Coefficient Adjustment
2835
Adjusts the environment coefficient for each mode. When the environment is
detected as HH, SP2803 and SP2807 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 120 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
[10 to 250 / 120 / 5%/step]
To Next Page
Loading...
