Service Mode Table
SM 5-141 G133
Service
Tables
004 Paper Transfer: FINE: 2nd Side *ENG
005-008
Adjusts the environment coefficient for each mode. When the environment is
detected as HH, SP2801 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side *ENG
[10 to 250 / 50 / 5%/step]
006 Separation DC: Plain: 2nd Side: *ENG
[10 to 250 / 80 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 80 / 5%/step]
[Special 3: Bias]
2851
Adjusts the DC voltage of the discharge plate for special paper 3.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Separation DC: Thick 1: 1st Side *ENG
002 Separation DC: Thick 1: 2nd Side *ENG
[0 to 5000 / 1500 / 10 –V/step]
003 Separation DC: Fine: 1st Side *ENG
004 Separation DC: Fine: 2nd Side *ENG
[0 to 5000 / 0 / 10 –V/step]
[Special 3: Bias: BW]
2852
Adjusts the current for the paper transfer roller for special paper 3 in
black-and-white mode.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Thick 1: 1st Side *ENG
002 Paper Transfer: Thick 1: 2nd Side *ENG
[0 to 200 / 30 / 1 –μA /step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[0 to 200 / 12 / 1 –μA /step]
2857 [Special 3: Bias: FC]
To Next Page
Loading...
