Ricoh G133 - Page 464

Service Mode Table
G133 5-142 SM
Adjusts the current for the paper transfer roller for special paper 3 in full color
mode.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Thick 1: 1st Side *ENG
[0 to 200 / 40 / 1 –μA /step]
002 Paper Transfer: Thick 1: 2nd Side *ENG
[0 to 200 / 45 / 1 –μA /step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[0 to 200 / 15 / 1 –μA /step]
[Special 3: Paper Size Correction]
2861
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2852 and SP2857 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
001
Paper Transfer: Plain: 1st Side:
S1
*ENG
002
Paper Transfer: Plain: 2nd Side:
S1
*ENG
[100 to 600 / 100 / 5%/step]
S1 size ≥ 297 mm (Paper
width)
003
Paper Transfer: FINE: 1st Side:
S1
*ENG
004
Paper Transfer: FINE: 2nd Side:
S1
*ENG
[100 to 600 / 100 / 5%/step]
S1 size ≥ 297 mm (Paper
width)
005
Paper Transfer: Plain: 1st Side:
S2
*ENG
[100 to 600 / 120 / 5%/step]
297 mm ≥ S2 size ≥ 275 mm
(Paper width)
006
Paper Transfer: Plain: 2nd Side:
S2
*ENG
[100 to 600 / 130 / 5%/step]
297 mm ≥ S2 size ≥ 275 mm
(Paper width)
007
Paper Transfer: FINE: 1st Side:
S2
*ENG
[100 to 600 / 120 / 5%/step]
297 mm ≥ S2 size ≥ 275 mm