Service Mode Table
G133 5-146 SM
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[–100 to 0 / 0 / 1 mm/step]
[Special 3: LL] Special 3 Paper: LL Environment Coefficient Adjustment
2881
Adjusts the environment coefficient for each mode. When the environment is
detected as LL, SP2852 and SP2857 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
[10 to 250 / 80 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 90 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[10 to 250 / 80 / 5%/step]
005-008
Adjusts the environment coefficient for each mode. When the environment is
detected as LL, SP2851 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side *ENG
006 Separation DC: Plain: 2nd Side: *ENG
[10 to 250 / 200 / 5%/step]
007 Separation DC: FINE: 1st Side *ENG
008 Separation DC: FINE: 2nd Side *ENG
[10 to 250 / 120 / 5%/step]
[Special 3: ML] Special 3 Paper: ML Environment Coefficient Adjustment
2882
Adjusts the environment coefficient for each mode When the environment is
detected as ML, SP2852 and SP2857 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[10 to 250 / 90 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
[10 to 250 / 90 / 5%/step]
To Next Page
Loading...
