Ricoh G133 - Page 467

Service Mode Table
SM 5-145 G133
Service
Tables
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 30 / 0 / 1 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
[0 to 30 / 20 / 1 mm/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[0 to 30 / 0 / 1 mm/step]
005 Separation DC: Plain: 1st Page *ENG
006 Separation DC: Plain: 2nd Page *ENG
[0 to 30 / 0 / 1 mm/step]
007 Separation DC: Fine: 1st Page *ENG
008 Separation DC: Fine: 2nd Page *ENG
[0 to 30 / 0 / 1 mm/step]
[Special 3: Trailing Edge Correction] Special 3 Paper: Trailing Edge
Correction
2873
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
 The paper trailing edge area can be adjusted with SP2874.
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
003 Paper Transfer: FINE: 1st Side *ENG
004 Paper Transfer: FINE: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
[Special 3: L Edge: Timing]
2874
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
Plain: 205 mm/sec, Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
[–100 to 0 / 0 / 1 mm/step]