Service Mode Table
G133 5-152 SM
[SecondaryFB: Special 1]
2933
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for special 1 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Special 2]
2934
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for special 2 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 1]
2935
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 1 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 2]
2936
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 2 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 3]
2937
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
To Next Page
Loading...
