Service Mode Table
SM 5-153 G133
Service
Tables
used for thick 3 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: OHP]
2938
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for OHP paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Special 3]
2939
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for special 3 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 4]
2940
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 4 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
002 Limit Voltage: Division 2 *ENG
[0 to 7000 / 5000 / 10 –V/step]
[SecondaryFB: Thick 5]
2941
Adjusts the upper limit voltage for the paper transfer roller. These SPs are only
used for thick 5 paper use in full color mode.
001 Limit Voltage: Division 1 *ENG
[0 to 7000 / 6000 / 10 –V/step]
To Next Page
Loading...
