Service Mode Table
SM 5-163 G133
Service
Tables
In toner consumption mode, toner is discharged when the detected
development gamma values (SP3611-004) exceed the target values
(SP3611-008) by more than the specified thresholds (SP3239-009).
[Toner Supply Type] Toner Supply Type ([Color])
3044
Selects the toner supply method type.
001 Bk *ENG
002 M *ENG
003 C *ENG
004 Y *ENG
[0 to 3 / 2 / 1/step] Alphanumeric
0: FIXED (with the supply rates stored with
SP 3401)
1: PID (Vtref_Fixed)
2: PID (Vtref_Control)
3: Not used
[Toner End Detection Set]
3045
Enables/disables the toner alert display on the LCD.
001 ON/OFF *ENG
[0 or 1 / 0 / 1/step]
0: Detect, 1: Not Detect
[Toner End/Near End]
3101
Displays the amount of each color toner. DFU
001 Toner Replenishment: Bk *ENG
[1 to 600 / 510 / 1 g/step]
002 Toner Replenishment: M *ENG
003 Toner Replenishment: C *ENG
004 Toner Replenishment: Y *ENG
[1 to 600 / 400 / 1 g/step]
005-008 Displays the consumed amount of each color toner.
005 Toner Consumption: Bk *ENG
006 Toner Consumption: M *ENG
[0 to 3000 / 0 / 0.001 g/step]
To Next Page
Loading...
