Service Mode Table
G133 5-162 SM
Adjusts the image transfer belt bias for Magenta.
T1 Bias: C *ENG
[0 to 80 / 33/ 1 µA/step]
015
Adjusts the image transfer belt bias for Cyan.
T1 Bias: Y *ENG
[0 to 80 / 45 / 1 µA/step]
016
Adjusts the image transfer belt bias for Yellow.
Developer Mixing Time *ENG
[0 to 250 / 10 / 1 sec/step]
017
Specifies the developer mixing time at the toner density adjustment.
LD Duty: K: Toner *ENG
[0 to 15 / 15 / 1 /step]
018
Adjusts the LD duty for the toner consumption mode at the toner density
adjustment.
In toner consumption mode, toner is discharged when the detected
development gamma values (SP3611-001) exceed the target values
(SP3611-005) by more than the specified thresholds (SP3239-009).
LD Duty:M: Toner *ENG
[0 to 15 / 15 / 1 /step]
019
Adjusts the LD duty for the toner consumption mode at the toner density
adjustment.
In toner consumption mode, toner is discharged when the detected
development gamma values (SP3611-002) exceed the target values
(SP3611-006) by more than the specified thresholds (SP3239-009).
LD Duty: C: Toner *ENG
[0 to 15 / 15 / 1 /step]
020
Adjusts the LD duty for the toner consumption mode at the toner density
adjustment.
In toner consumption mode, toner is discharged when the detected
development gamma values (SP3611-003) exceed the target values
(SP3611-007) by more than the specified thresholds (SP3239-009).
LD Duty: Y: Toner *ENG
[0 to 15 / 15 / 1 /step]
021
Adjusts the LD duty for the toner consumption mode at the toner density
adjustment.
To Next Page
Loading...
