Service Mode Table
SM 5-207 G133
Service
Tables
006 Communication Test Call
007
Machine Information
Notice
[0 or 1 / 1 / - ]
0: Off, 1: On
008 Alarm Notice
[0 or 1 / 0 / - ]
0: Off, 1: On
009
Non Genuine Toner
Alarm
[0 or 1 / 1 / - ]
0: Off, 1: On
010
Supply Automatic
Ordering Call
011
Supply Management
Report Call
[0 or 1 / 0 / - ]
0: Off, 1: On
5801
[Memory Clear]
NOTE: For more information, see “NOTE 1” following "SP8-xxx" table.
001 All Clear
Resets all correction data for process control and all software counters, and
returns all modes and adjustments to their default values.
Use this SP only after replacing the NVRAM, or after the copier has
malfunctioned due to a damaged NVRAM.
002 Engine - -
Clears the engine settings.
003 SCS - -
Clears the system settings.
IMH Memory Clr - -
004
Clears IMH data. DFU
MCS - -
005
Clears MCS data. DFU
To Next Page
Loading...
